Flammable Liquids

SITE SAFE

Dangerous Goods and Flammable Liquids Store

	Features Patented security locking system Specifications Measurements Pricing Information request

• The unit is a Type "D" building designed to Dangerous Goods (storage and handling) Regulations for the storage of one class (not mixed) of Dangerous Goods, being classes 2.1, 2.2, 2.3, some 4.1, 4.2, some 4.3, 5.1, 6.1 and 8. It also meets Australian Standards AS 1940-1993 requirements for flammable liquids, class 3 and combustible liquids. This unit meets all the requirements of the above Regulations and Standards, however the purchaser must obtain all necessary permits.

• Designed and Manufactured in Australia to adequately withstand cyclonic conditions as per Australian Standard 1170.2-1989.

• SITE SAFE Dangerous Goods Store has also passed a NATA approved loading test for 2.5 tonne payload to be lifted by crane, and is designed for a 10 tonne storage load on the ground.

Features

	Ventilation through external walls immediately below the ceiling and above the upper limit of the spillage compound to meet the requirements of Schedule 12 Section 6 and Section 8 of the 1989 Dangerous Goods Regulations.
	Dangerous Goods Store with a dividing wall can also be used to store Class 2.2 subsidiary risk 5.1 and Class 2.1 in the one unit as in Regulation 508 of 1989 Dangerous Goods Regulations.
	Dangerous Goods Store with 100mm high spill control (bunding) allows you to store 2700L or 2700Kg of liquids, but this can be increased with higher bunding.
	Quality finish, every unit is sand blasted, primed and painted to customer specifications.
	Standard features include: Air Vents; Bunding; Drainage Points; Electrical Bonding; Lifting and Pulling Lugs.
	Optional features: Shelving; Roof Vent; Foam Ports and Cast Iron Wheels.
	Patented Security Locking System

Patented Security Locking System

Specifications

Construction	Non combustible heavy duty steel
Walls	2mm V crimp
Floor	3mm steel plate
Roof	2mm flat sheet fully welded
Frame	3mm Large press section
Bearers	2/100 x 50 RHS
Mobile	On cast iron wheels (optional)
Finish	Sand blasted and primed
Colour	To customer specification

Measurements

External	3.3m x 2.4m x 2.6mh
Internal	2.92m x 2.25m x 2.23mh
Door opening	1.295m x 2.175mh
Weight	1000kg

Pricing

Description	Measurements	Price
Dangerous Goods and Flammable Liquids Store	3.3m x 2.4m x2.6mh	$95.10 p/week
Sale Price	3.3m x 2.4m x2.6mh	POA

TRANSPORT of this unit is POA, starting from $150.00 + GST each way by tilt tray in the Melbourne Metropolitan Area (with a possible fuel levy), & $3.50 per kilometre for Country Areas + GST, and fuel levy.

# All prices include GST.

Last modified: June 27, 2008

Contact Information


Telephone: 03-9337-6640
FAX: 03-9331-1016
Address: 12 Phillip Road, East Keilor, 3033, Vic
Email:: General Information: sitesafe@bigpond.com.au